The Death or Glory R32 Skyline is being fixed and made ready for the track

The road to Rogue Concept Continues

One of the things the Skyline had been suffering with for a while was play in the steering, it was initially noted by the MOT tester last year, and while I did have the parts to fix this, it had to sit on the back burner when the gearbox failed on the Discovery.

However, now that I need to make sure the car is good for Rogue Concept 2019, now is the time to tackle my wobbly front end, and boy is it wobbly! When its on the ground you can see a bit of play by shaking the wheels but now that its up in the air the extent of the problem is REALLY obvious!

A couple of years back, thinking I was being cool I fitted a set of adjustable lower control arms, but as I mentioned here unless you’re ONLY using the car on track or have a large maintenance budget they’re not so good.

Thankfully I had got myself on a pair of 25mm extended stock lower control arms with good ball joints and bushes. So I set about swapping the adjustable LCA’s out for the stock LCA’s but there was a problem…

Despite being only two years old and that I had greased everything before fitting them the castle nuts/bolts that hold the hub in place, and the bolts/nuts that attach the tension rods had literally fused themselves together, making them almost impossible to remove them. However with some brute force and a breaker bar, they finally succumbed to my will… and snapped (I did say ALMOST impossible to remove!)

Then it was just a case of bolting on the extended LCA’s, a relatively straight forward process although the tension rods no longer had their bolts pressed in and I couldn’t find any that I could press in their place. However a couple of M12 x 40mm high tensile bolts and nyloc nuts did the trick.

Now that everything was bolted together the only thing left to do was give the hub a good wobble to make sure nothing had been missed and that the play was no longer there.

The extended LCA’s do need a bit of a clean up, however I plan to do this after RC19 as I have a lot to get done before then.

Lee Richmond

Leave a Reply